by admin | Oct 24, 2023 | Networking
This information is provided as a quick setup guide for configuring VLANs on a Managed Netgear Switch 1. Unpack the switch(es) and connect them to your LAN. 2. Download the Netgear Swtich Discovery Tool (NSDT) –...
by admin | Sep 10, 2021 | Networking
These are notes of a recent project to access a Cisco Switch at an anonymous client site. 1. The Management VLAN was set to 10, while the main Data VLAN was set to 11. When the old Cisco Firewall was replaced with a different Firewall, some of the VLANs went away....
by admin | Jun 3, 2021 | Networking
When connecting a Serial to USB Console cable in Windows 10, it might not open a COM port automatically. www.ftdichip.com/Drivers/VCP.htm Use the URL above to download the VCP Driver for your platform (Windows) and architecture (x64). Open it and extract the contents...
by admin | Oct 8, 2018 | Networking
To add VLANs to the Cisco 200 series, perform the following steps: 1. Under the VLAN Management section, click on VLAN Settings. Then click the “ADD” button to add your new VLAN(s) and label them appropriately, then APPLY. 2. Now move to the Interface Settings section...
Recent Comments